To Next PageTo Next Page
Need help?Do you have a question about the Edirol FA-66 and is the answer not in the manual?
General| Interface | FireWire |
|---|---|
| Phantom Power | Yes |
| Bus Power | Yes |
| Inputs | 2 x XLR/TRS combo |
| Outputs | 6 |
| Input Connectors | 2 x XLR/TRS combo, 2 x RCA |
| Output Connectors | TRS, RCA |
| Power Supply | Bus power or external power adapter |
| Digital I/O | S/PDIF (Coaxial) |
| Sample Rate | 24-bit/192kHz |
Details instructions for preventing fire, electric shock, or injury, and explains symbols and cautions.
Details connections and settings for recording vocals or instruments, including sample rate and impedance.
Guides connecting digital devices and synchronizing with digital input, including sample rate and digital input switch settings.
Addresses common problems during driver installation and provides solutions.
Covers issues related to CD-ROM, power supply, FireWire connectivity, and computer specifications.
Discusses problems with driver installation, signing options, and the Found New Hardware Wizard.
Diagnoses and resolves 'no sound' problems, covering volume controls, connections, software settings, and driver status.
Addresses issues with sample rate settings, device connections, and computer startup order.
Troubleshoots headphone monitoring, computer audio output, and silent recording files.
Covers problems with digital recording connections and 24-bit audio data playback/recording.
Provides solutions for noise and pops during audio playback or recording, including system performance settings.
Addresses noise from Windows Power Management, multiple computer connections, and additional FireWire devices.
Suggests disabling LAN adapters, checking sample rates, and adding memory to resolve sound issues.
Covers Mac OS startup order, FireWire hubs, and potential noise sources from connected MIDI modules.
Addresses issues where playback or recording stops midway due to heavy computer processing loads.
Discusses distortion, pitch issues, or noise in digitally recorded sound related to sample rate mismatches.
Troubleshoots noise or distortion when FA-66 is not connected, and weak sound issues.
Addresses distorted input sound, insufficient volume from devices, and appropriate volume knob settings.
Resolves noise in guitar sound and insufficient volume by checking connections and impedance settings.
Provides guidance on adjusting microphone input levels for adequate volume.
