Need help?Do you have a question about the EDMI Atlas Mk7 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Accuracy Class | 1.0 |
| Current Range | 10(100)A |
| Frequency Range | 50Hz / 60Hz |
| Communication Protocols | DLMS/COSEM, M-Bus |
| Standards Compliance | IEC 62052-11, IEC 62053-22 |
| Storage Temperature Range | -40°C to +70°C |
| Ingress Protection | IP51 |
Lists available serial port options and their modem communication configurations for the Mk10.
Details the different output types and their ratings for the Mk7C meter.
Covers the physical size, mounting points, and installation requirements for the Mk10E meter.
Details the terminals available on the Mk10E meter under the terminal cover.
Explains the methods for removing/connecting CT to VT links on Mk10E for testing.
Describes the function and location of the Config jumper on the Mk10E meter.
Provides in-depth wiring information for Mk10E current and voltage connections.
Details current and voltage connection methods for Mk10E in different modes.
Lists serial port options and configurations for the Mk10E meter.
Explains the RS-232 port on the Mk10E, its connector, and connection details.
Describes RS-485 port options and connections for the Mk10E meter.
Explains input types, voltage ranges, and quantities for the Mk10E meter.
To Next Page
