Edwards EH500

A301-05-880 Issue A
Page 2 © Edwards Limited 2014. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
Figure 1 - All EH250FX and EH500FX pump variants
1. Terminal box
2. Shaft seal reservoir vented oil filler plug
3. Hydrokinetic drive/gearbox oil filler plug
4. Inlet flange
5. External evacuation point
6. End cover
7. Rotors
8. Stator housing
9. Hydrokinetic drive/gearbox oil drain plug (under the pump)
10. Direction of rotation sight glass
11. Oil level sight glass (hydrokinetic drive/gearbox)
12. Oil level sight glass (shaft seal reservoir)