This product has been manufactured under a qualit
system registered to ISO9001
Declaration of Incorporation
We, Edwards,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the machine(s)
SPLIT-FLOW EXT Compound Turbomolecular Pump (24 Volts):
EXT200/200Hi B756-05-991
EXT200/200Hi B756-25-991
EXT200/200H B756-26-991
SPLIT-FLOW EXT Compound Turbomolecular Pump(80 Volts):
EXT200/200H B756-05-000
EXT200/200Hi B756-25-000
EXT200/200H B756-28-000
to which this declaration relates is intended to be incorporated into other equipment and not to
function independently. The machine(s) must not be put into service until the equipment into
which it is incorporated has been brought into conformity with the provisions of the Machinery
Directive, 2006/42/EC.
The machine(s) is in conformity with the following standard(s) or other normative
document(s)
EN ISO 12100-2: 2003 Safety of Machinery. Basic Concepts, General Principles for
+ A1: 2009 Design. Technical Principals
EN1012-2:1997, A1: 2010 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
The relevant essential requirements of the Machinery Directive 2006/42/EC Annex 1 have been applied
and fulfilled so far as practicable for this partly completed machinery. The relevant technical
documentation has been compiled in accordance with Annex VII Part B. In response to a reasoned request
by the national authorities, Edwards Ltd undertakes to provide relevant information on the partly
completed machinery (via email).
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
Date and Place
P200-00-520 Issue C
B. D. Brewster, Technical Manager
– Burgess Hill Products
22 December 2009
To Next Page
Loading...
