Edwards GXS 250

Figure 64 Dry pump clean PDT menu conguraon items
9.9.1 Changing the dry pump speed during the clean operaon
Use the Set DP speed menu item to change the dry pump speed during the clean cycle.
It is not recommended to increase the pump speed if solvent is used. If the dry pump
clean is just using air then seng the speed to 110 Hz would increase the eciency of
the cleaning cycle.
9.9.2 Changing the clean cycle me
The me period for the dry pump clean cycle can be changed using the DP clean me
menu item.
Page 143
M58800880_H - Pump display terminal