Edwards iGX100N User Manual

A546–00–880
Issue C Original
Instruction Manual
iGX Dry Pumping Systems
Description Description
iGX100L 200 V – 230 V 50/60 Hz A546-10-958
iGX100L 380 V – 460 V 50/60 Hz A546-10-959
iGX100L 200 V – 230 V 50/60 Hz SS A548-10-958
iGX100L 380 V – 460 V 50/60 Hz SS A548-10-959
iGX600L 200 V – 230 V 50/60 Hz A546-30-958
iGX600L 380 V – 460 V 50/60 Hz A546-30-959
iGX600L 200 V – 230 V 50/60 Hz SS A548-30-958
iGX600L 380 V – 460 V 50/60 Hz SS A548-30-959
iGX100N 200 V – 230 V 50/60 Hz A546-11-958
iGX100N 380 V – 460 V 50/60 Hz A546-11-959
iGX100N 200 V – 230 V 50/60 Hz SS A548-11-958
iGX600N 200 V – 230 V 50/60 Hz A546-31-958
iGX600N 380 V – 460 V 50/60 Hz A546-31-959
Description Description
iGX1000N 200 V – 230 V 50 Hz A546-81-958
iGX1000N 380 V – 460 V 50 Hz A546-81-959
iGX1000N 200 V – 230 V 50/60 Hz SS A548-81-958
iGX100M 200 V – 230 V 50/60 Hz A546-12-958
iGX100M 380 V – 460 V 50/60 Hz A546-12-959
iGX100M 200 V – 230 V 50/60 Hz SS A548-12-958
iGX100MTi 200 V – 230 V 50/60 Hz A546-48-958
iGX100MTi 380 V – 460 V 50/60 Hz A546-48-959
iGX100MTi 200 V – 230 V 50/60 Hz SS A548-48-958
iGX600M 200 V – 230 V 50/60 Hz A546-32-958
iGX600M 380 V – 460 V 50/60 Hz A546-32-959
iGX600M 200 V – 230 V 50/60 Hz SS A548-32-958

Edwards iGX100N Specifications

General

Brand	Edwards
Model	iGX100N
Category	Laboratory Equipment
Language	English

Summary

Introduction

Technical Data

General Technical Data

Provides physical dimensions, mass, noise, and vibration specifications for various iGX models.

Electrical Data

Lists supply voltage, current ratings, and motor power for different system configurations.

Connections

General Data

Installation

Locate the Dry Pumping System

Connect Vacuum and Exhaust Systems

Instructions for connecting the iGX to external vacuum and exhaust pipelines.

Connect Nitrogen Supply

Leak-test the iGX System

Procedures for leak testing the system to prevent substance release and air ingress.

Connect Electrical Supply

Instructions for safely connecting the iGX system to the electrical power source.

Connect Emergency Stop Circuit

Guidance on integrating the iGX system with an emergency stop facility.

Connect Cooling-Water Hoses

Commission the iGX System

Procedures for verifying system functionality and initial setup after installation.

Operation

Start-up

Procedures for safely powering on and initiating the iGX dry pumping system.

Manual Shut-down

Instructions for safely stopping the iGX system manually via various control methods.

Automatic Shut-down

Details on system shutdown conditions triggered by safety sensors or alarms.

Unplanned Shutdowns and Alarms

Emergency Stop

Procedures for using the emergency stop button to halt the system immediately.

Restart the Pump

Maintenance

Safety and Maintenance Frequency

Draining the Cooling-Water