Edwards iGX100L

A546–00–880
Issue C Original
Instruction Manual
iGX Dry Pumping Systems
Description Description
iGX100L 200 V – 230 V 50/60 Hz A546-10-958
iGX100L 380 V – 460 V 50/60 Hz A546-10-959
iGX100L 200 V – 230 V 50/60 Hz SS A548-10-958
iGX100L 380 V – 460 V 50/60 Hz SS A548-10-959
iGX600L 200 V – 230 V 50/60 Hz A546-30-958
iGX600L 380 V – 460 V 50/60 Hz A546-30-959
iGX600L 200 V – 230 V 50/60 Hz SS A548-30-958
iGX600L 380 V – 460 V 50/60 Hz SS A548-30-959
iGX100N 200 V – 230 V 50/60 Hz A546-11-958
iGX100N 380 V – 460 V 50/60 Hz A546-11-959
iGX100N 200 V – 230 V 50/60 Hz SS A548-11-958
iGX600N 200 V – 230 V 50/60 Hz A546-31-958
iGX600N 380 V – 460 V 50/60 Hz A546-31-959
Description Description
iGX1000N 200 V – 230 V 50 Hz A546-81-958
iGX1000N 380 V – 460 V 50 Hz A546-81-959
iGX1000N 200 V – 230 V 50/60 Hz SS A548-81-958
iGX100M 200 V – 230 V 50/60 Hz A546-12-958
iGX100M 380 V – 460 V 50/60 Hz A546-12-959
iGX100M 200 V – 230 V 50/60 Hz SS A548-12-958
iGX100MTi 200 V – 230 V 50/60 Hz A546-48-958
iGX100MTi 380 V – 460 V 50/60 Hz A546-48-959
iGX100MTi 200 V – 230 V 50/60 Hz SS A548-48-958
iGX600M 200 V – 230 V 50/60 Hz A546-32-958
iGX600M 380 V – 460 V 50/60 Hz A546-32-959
iGX600M 200 V – 230 V 50/60 Hz SS A548-32-958

Edwards iGX100L Specifications

General

Type	Dry Vacuum Pump
Frequency	50/60 Hz
Ultimate Pressure	1 x 10-2 mbar (0.75 x 10-2 Torr)
Outlet Port	NW25 (KF25)
Voltage	200-230 V
Operating Temperature Range	5°C to 40°C

Summary

Introduction to iGX Dry Pumping Systems

Applications of the iGX System

Technical Data and Specifications

General Technical Data

Provides physical dimensions, weight, noise, and vibration specifications for different iGX models.

Electrical Data

Lists supply voltage, frequency, full load current, and motor ratings for various configurations.

System Connections

General System Data

Installation Procedures

Locate the Dry Pumping System

Guides on positioning the iGX system, including lifting, levelling, and securing requirements.

Connect to Vacuum and Exhaust Systems

Instructions for connecting the pump inlet/outlet to vacuum and exhaust systems.

Connect Nitrogen Supply

Handling FlammablePyrophoric Materials

Gas Purge Procedures

Leak-Test the iGX System

Connect Electrical Supply

Instructions for safely connecting the iGX system to the electrical supply.

Connect to Emergency Stop Circuit

Details on connecting the iGX system to an emergency stop facility for immediate shutdown.

Connect Cooling-Water Hoses

Commission the iGX System

Steps to commission the iGX system after installation, including checks and startup.

Install Additional Safety Equipment

Operation of the iGX System

System Start-up Procedures

Procedures for safely starting the iGX system using various control methods.

Manual System Shut-down

Instructions for performing a manual shutdown of the iGX system via different control interfaces.

Automatic Shut-down Conditions

Details automatic shutdown conditions and the 'Run 'til crash' option.

Unplanned Shutdowns and Alarms

Emergency Stop Operation

Explains how to use the emergency stop function for immediate system shutdown.

Restarting After Shutdown

Maintenance and Servicing

Safety and Maintenance Frequency

Outlines safety precautions and general guidelines for performing maintenance tasks.