Edwards iGX600N User Manual

A546–00–880
Issue C Original
Instruction Manual
iGX Dry Pumping Systems
Description Description
iGX100L 200 V – 230 V 50/60 Hz A546-10-958
iGX100L 380 V – 460 V 50/60 Hz A546-10-959
iGX100L 200 V – 230 V 50/60 Hz SS A548-10-958
iGX100L 380 V – 460 V 50/60 Hz SS A548-10-959
iGX600L 200 V – 230 V 50/60 Hz A546-30-958
iGX600L 380 V – 460 V 50/60 Hz A546-30-959
iGX600L 200 V – 230 V 50/60 Hz SS A548-30-958
iGX600L 380 V – 460 V 50/60 Hz SS A548-30-959
iGX100N 200 V – 230 V 50/60 Hz A546-11-958
iGX100N 380 V – 460 V 50/60 Hz A546-11-959
iGX100N 200 V – 230 V 50/60 Hz SS A548-11-958
iGX600N 200 V – 230 V 50/60 Hz A546-31-958
iGX600N 380 V – 460 V 50/60 Hz A546-31-959
Description Description
iGX1000N 200 V – 230 V 50 Hz A546-81-958
iGX1000N 380 V – 460 V 50 Hz A546-81-959
iGX1000N 200 V – 230 V 50/60 Hz SS A548-81-958
iGX100M 200 V – 230 V 50/60 Hz A546-12-958
iGX100M 380 V – 460 V 50/60 Hz A546-12-959
iGX100M 200 V – 230 V 50/60 Hz SS A548-12-958
iGX100MTi 200 V – 230 V 50/60 Hz A546-48-958
iGX100MTi 380 V – 460 V 50/60 Hz A546-48-959
iGX100MTi 200 V – 230 V 50/60 Hz SS A548-48-958
iGX600M 200 V – 230 V 50/60 Hz A546-32-958
iGX600M 380 V – 460 V 50/60 Hz A546-32-959
iGX600M 200 V – 230 V 50/60 Hz SS A548-32-958

Edwards iGX600N Specifications

General

Pumping speed	60 m3h-1
Ultimate pressure	5 x 10-2 mbar
Motor power	0.37 kW
Frequency	50/60 Hz
Outlet Flange	NW25
Type	Dry pump

Summary

Introduction

Scope and definitions

Technical Data

General technical data

Presents general specifications including dimensions, mass, noise, and vibration levels.

Electrical Data

Provides electrical specifications such as supply voltage, full load current, and motor ratings.

Connections

Installation

Locate the dry pumping system

Procedure for positioning the iGX system, including lifting and levelling.

Connect the iGX system to your vacuum/exhaust system and interstage connection (if fitted)

Instructions for connecting the pump to vacuum and exhaust systems.

Connect the nitrogen supply (if provided)

Flammable/pyrophoric materials

Safety precautions for handling flammable or pyrophoric materials with the iGX system.

Gas Purges

Leak-test the iGX system

Connect the electrical supply

Instructions for connecting the iGX system to the electrical supply safely.

Connect to your emergency stop circuit

Instructions for connecting the iGX system to an emergency stop facility.

Connect the cooling-water hoses

Commission the iGX system

Step-by-step guide to commissioning the iGX system after installation.

Install additional safety equipment

OPERATION

Start-up

Procedure for safely starting the iGX system, including checks and controls.

Manual shut-down

Instructions for safely shutting down the iGX system manually.

Automatic shut-down

Unplanned shutdown and alarms

Emergency stop

Procedure for using the emergency stop switch to shut down the system.

Restart the pump after an emergency stop or automatic shut-down

MAINTENANCE

Safety and maintenance frequency

Outlines safety precautions and recommended maintenance frequencies.

Relocate the system for maintenance