Edwards iGX Series User Manual

A546–00–880
Issue C Original
Instruction Manual
iGX Dry Pumping Systems
Description Description
iGX100L 200 V – 230 V 50/60 Hz A546-10-958
iGX100L 380 V – 460 V 50/60 Hz A546-10-959
iGX100L 200 V – 230 V 50/60 Hz SS A548-10-958
iGX100L 380 V – 460 V 50/60 Hz SS A548-10-959
iGX600L 200 V – 230 V 50/60 Hz A546-30-958
iGX600L 380 V – 460 V 50/60 Hz A546-30-959
iGX600L 200 V – 230 V 50/60 Hz SS A548-30-958
iGX600L 380 V – 460 V 50/60 Hz SS A548-30-959
iGX100N 200 V – 230 V 50/60 Hz A546-11-958
iGX100N 380 V – 460 V 50/60 Hz A546-11-959
iGX100N 200 V – 230 V 50/60 Hz SS A548-11-958
iGX600N 200 V – 230 V 50/60 Hz A546-31-958
iGX600N 380 V – 460 V 50/60 Hz A546-31-959
Description Description
iGX1000N 200 V – 230 V 50 Hz A546-81-958
iGX1000N 380 V – 460 V 50 Hz A546-81-959
iGX1000N 200 V – 230 V 50/60 Hz SS A548-81-958
iGX100M 200 V – 230 V 50/60 Hz A546-12-958
iGX100M 380 V – 460 V 50/60 Hz A546-12-959
iGX100M 200 V – 230 V 50/60 Hz SS A548-12-958
iGX100MTi 200 V – 230 V 50/60 Hz A546-48-958
iGX100MTi 380 V – 460 V 50/60 Hz A546-48-959
iGX100MTi 200 V – 230 V 50/60 Hz SS A548-48-958
iGX600M 200 V – 230 V 50/60 Hz A546-32-958
iGX600M 380 V – 460 V 50/60 Hz A546-32-959
iGX600M 200 V – 230 V 50/60 Hz SS A548-32-958

Edwards iGX Series Specifications

General

Brand	Edwards
Model	iGX Series
Category	Laboratory Equipment
Language	English

Summary

1 Introduction

1.1 Scope and definitions

Defines the manual's purpose and safety warning types.

1.2 Applications

Discusses suitable applications for the iGX system and warranty implications.

1.3 The iGXL system

Explains the iGXL system's capability and limitations regarding process gases.

1.4 Priority of control

Details how control is managed between different modules like PDT, MicroTIM, and front panel.

1.5 Active utility control

Explains Active Utility Control (AUC) and Advanced AUC features for power reduction.

2 Technical Data

2.1 General technical data

Provides specifications like dimensions, mass, noise, and vibration levels.

2.2 Electrical Data

Details electrical specifications such as supply voltage and full load current.

2.3 Loading

Presents data on the centre of gravity and levelling foot loads.

2.4 Connections

Lists iGX connector types and their mating connector descriptions.

2.5 General Data

Covers electrical, water-cooling, connections, and operating conditions.

3 Installation

3.1 Locate the dry pumping system

Provides instructions for positioning and securing the iGX system.

3.2 Lubrication

States the system is pre-filled and requires no oil level check.

3.3 Connect the iGX system to your vacuum/exhaust system and interstage connection (if fitted)

Guides on connecting the pump to vacuum/exhaust systems and interstage connections.

3.4 Connect to your factory extraction system (optional)

Optional connection for factory extraction systems.

3.5 Connect the nitrogen supply (if provided)

Instructions for connecting the nitrogen supply.

3.5.1 Flammable/pyrophoric materials

Safety precautions when handling flammable or pyrophoric materials.

3.5.2 Gas Purges

Details the use of inert gas purges for safety with dangerous gases.

3.6 Leak-test the iGX system

Instructions for leak testing the system after installation.

3.7 Connect the electrical supply

Guides on safely connecting the system to the electrical supply.

3.8 Connect an additional RF earth (ground) (optional)

Instructions for connecting an additional RF earth for high RF emission areas.

3.9 Connect to your emergency stop circuit

Details how to connect the system to an emergency stop facility.

3.10 Connect the cooling-water hoses

Provides step-by-step instructions for connecting cooling-water hoses.

3.11 Accessories

Refers to accessory manuals and explains the function of disconnect boxes.

3.12 Commission the iGX system

Outlines the procedure for commissioning the iGX system after installation.

3.13 Install additional safety equipment

Guidance on installing extra safety equipment like nitrogen flow measurement.

4 OPERATION

4.1 Start-up

Provides instructions for starting the iGX system.

4.2 Status indicators

Explains the meaning of various status LEDs on the system.

4.3 Manual shut-down

Details the procedure for manually shutting down the iGX system.

4.4 Automatic shut-down

Describes automatic shutdown conditions and the 'Run 'til crash' option.

4.5 Unplanned shutdown and alarms

Discusses unplanned shutdowns and alarms, and their causes.

4.6 Emergency stop

Explains how to use the emergency stop switch.

4.7 Restart the pump after an emergency stop or automatic shut-down

Guides on restarting the system after an emergency or automatic shutdown.

4.8 Single equipment monitor (SEM)

Information on using the Single Equipment Monitor (SEM) for configuration.

5 MAINTENANCE

5.1 Safety and maintenance frequency

Covers safety precautions and frequency for maintenance tasks.

5.2 Relocate the system for maintenance

Provides procedures for relocating the system for maintenance purposes.

5.3 Draining the cooling-water

Step-by-step instructions for draining the cooling-water system.

5.4 Cleaning the pump

Guidelines for cleaning the exterior of the pump.

6 TRANSPORTATION, STORAGE AND DISPOSAL

6.1 Transportation

Safety warnings and procedures for transporting the iGX system.

6.2 Storage

Guidelines for storing the iGX system under suitable conditions.

6.3 Disposal

Safety and environmental requirements for disposing of the system.

7 SERVICE, SPARES AND ACCESSORIES

7.1 Introduction

Outlines procedures for returning equipment and ordering parts.

7.2 Service

Describes Edwards Service Centre capabilities and support options.

7.3 Ordering accessories

Lists available accessories and their item numbers for ordering.