EasyManuals Logo

Edwards iGX Series User Manual

Edwards iGX Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
A546–00–880 Issue C
Page 2 © Edwards Limited 2008. All rights reserved.
Edwards and the Edwards logo are trade marks of Edwards Limited.
Introduction
The Pressurised and Risk of explosion warnings only appear in this manual.
Material Safety Data Sheets for chemicals supplied by Edwards can be obtained by contacting Edwards.
1.2 Applications
If you use the iGX system on an application for which it is not suitable (refer to Figure 1), you may invalidate your
warranties. If in doubt, contact Edwards who will advise you as to the suitability of the iGX system for any particular
application.
Figure 1 - iGX Applications chart
1.3 The iGXL system
Pumping a chemical that will attack the materials in contact with these process materials may, over time, result in the
internal contents of the pump becoming exposed to the external environment, which may constitute a safety hazard.
If in doubt, contact Edwards who will advise you as to the suitability of this pump for any particular application.
It is also a feature of this pump design that process gases are contained within the gearbox. This pump is not suitable
for use with flammable, hazardous, toxic or corrosive gases or material.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edwards iGX Series and is the answer not in the manual?

Edwards iGX Series Specifications

General IconGeneral
BrandEdwards
ModeliGX Series
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals