EasyManuals Logo

Edwards iGX Series User Manual

Edwards iGX Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
© Edwards Limited 2008. All rights reserved. Page 1
Edwards and the Edwards logo are trade marks of Edwards Limited.
Introduction
A546–00–880 Issue C
1Introduction
1.1 Scope and definitions
This manual provides installation, operation and maintenance instructions for the Edwards iGX dry pumping systems.
You must use your pump as specified in this manual.
Read this manual before you install and operate your pump. Important safety information is highlighted as WARNING
and CAUTION instructions; you must obey these instructions. The use of WARNINGS and CAUTIONS is defined below.
CAUTION
Cautions are given where failure to observe the instruction could result in damage to the equipment, associated
equipment and process.
The units used throughout this manual conform to the SI international system of units of measurement
In accordance with the recommendations of IEC1010, the following warning labels are on the pump:
WARNING
Warnings are given where failure to observe the instruction could result in injury or death to
people.
Warning – refer to accompanying
documentation.
Warning – risk of electric shock.
Warning – hot surfaces. Warning – moving parts present.
Warning – heavy object. Warning - pressurised.
RF earth (ground). Protective earth (ground).
Warning - use protective equipment. Warning - Risk of explosion.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edwards iGX Series and is the answer not in the manual?

Edwards iGX Series Specifications

General IconGeneral
BrandEdwards
ModeliGX Series
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals