Edwards iGX600M User Manual

A546–00–880
Issue C Original
Instruction Manual
iGX Dry Pumping Systems
Description Description
iGX100L 200 V – 230 V 50/60 Hz A546-10-958
iGX100L 380 V – 460 V 50/60 Hz A546-10-959
iGX100L 200 V – 230 V 50/60 Hz SS A548-10-958
iGX100L 380 V – 460 V 50/60 Hz SS A548-10-959
iGX600L 200 V – 230 V 50/60 Hz A546-30-958
iGX600L 380 V – 460 V 50/60 Hz A546-30-959
iGX600L 200 V – 230 V 50/60 Hz SS A548-30-958
iGX600L 380 V – 460 V 50/60 Hz SS A548-30-959
iGX100N 200 V – 230 V 50/60 Hz A546-11-958
iGX100N 380 V – 460 V 50/60 Hz A546-11-959
iGX100N 200 V – 230 V 50/60 Hz SS A548-11-958
iGX600N 200 V – 230 V 50/60 Hz A546-31-958
iGX600N 380 V – 460 V 50/60 Hz A546-31-959
Description Description
iGX1000N 200 V – 230 V 50 Hz A546-81-958
iGX1000N 380 V – 460 V 50 Hz A546-81-959
iGX1000N 200 V – 230 V 50/60 Hz SS A548-81-958
iGX100M 200 V – 230 V 50/60 Hz A546-12-958
iGX100M 380 V – 460 V 50/60 Hz A546-12-959
iGX100M 200 V – 230 V 50/60 Hz SS A548-12-958
iGX100MTi 200 V – 230 V 50/60 Hz A546-48-958
iGX100MTi 380 V – 460 V 50/60 Hz A546-48-959
iGX100MTi 200 V – 230 V 50/60 Hz SS A548-48-958
iGX600M 200 V – 230 V 50/60 Hz A546-32-958
iGX600M 380 V – 460 V 50/60 Hz A546-32-959
iGX600M 200 V – 230 V 50/60 Hz SS A548-32-958

Edwards iGX600M Specifications

General

Brand	Edwards
Model	iGX600M
Category	Laboratory Equipment
Language	English

Summary

Technical Data

General technical data

Electrical Data

Connections

General Data

Installation

Locate the dry pumping system

Guides on positioning the system, including lifting, levelling, and securing.

Connect the iGX system to your vacuum/exhaust system and interstage connection (if fitted)

Instructions for connecting inlet/exhaust to vacuum and exhaust systems, and interstage.

Leak-test the iGX system

Instructions for performing a critical leak test after installation.

Connect the electrical supply

Provides detailed instructions for connecting the electrical supply safely.

Connect to your emergency stop circuit

Instructions for integrating the system with an emergency stop circuit for safety.

Connect the cooling-water hoses

Step-by-step guide for connecting essential cooling-water hoses.

Commission the iGX system

Steps for initial start-up and verification of the installed system.

OPERATION

Start-up

Details the procedure for starting up the iGX system safely.

Manual shut-down

Instructions for safely shutting down the system manually.

Automatic shut-down

Describes conditions and modes for automatic system shutdown for safety.

Unplanned shutdown and alarms

Emergency stop

Information on using the emergency stop function for immediate safety.

Restart the pump after an emergency stop or automatic shut-down

MAINTENANCE

Safety and maintenance frequency

Highlights critical safety precautions and general maintenance guidelines.