Edwards iH80 User Manual

A590-00-880
Issue D Original
Instruction Manual
iH Dry Pumping Systems
Description Item Number
iH80 A590-00-xxx
iH160 A590-10-xxx
iH160HTX A590-12-xxx
iH600 A590-20-xxx
iH1000 A590-30-xxx
iH1800 A590-40-xxx
iH1800HTX A590-42-xxx
iH1800NRV A590-50-xxx
iH1800NRV HTX A590-52-xxx
Where xxx is as follows:
460 V, 60 Hz, 3 phase 908
200/208 V, 50/60 Hz, 3 phase 945
380/415 V, 50 Hz, 3 phase 946
230 V, 60 Hz, 3 phase 957

Edwards iH80 Specifications

General

Brand	Edwards
Model	iH80
Category	Water Pump
Language	English

Summary

Technical Data

General Technical Data

Presents key physical and performance specifications for iH80, iH600, and iH1000 pumps.

Electrical Data

Loading

Installation

Locate the Dry Pumping System

Instructions for positioning and securing the iH system in its operating environment.

Connect the Dry Pumping System to Your Vacuum/Exhaust System

Guides on connecting the iH system's inlet and exhaust to external systems.

Connect the Nitrogen Supply

Electrical Supply

Instructions for connecting the iH system to the appropriate electrical power source.

Commission the System

Steps to follow for initial system setup, checks, and verification after installation.

Install Additional Safety Equipment

Operation

Start-up

Procedures for safely starting the iH dry pumping system.

Manual Shut-down

Steps for safely shutting down the iH system manually.

Automatic Shut-down

Emergency Stop

How to use the emergency stop function to halt the system immediately.

Maintenance

Safety and Maintenance Frequency

Outlines safety precautions and recommended maintenance schedules for the iH system.

General Maintenance

Replace a Fuse

Service, Spares and Accessories