To Next PageTo Next Page
Need help?Do you have a question about the Edwards iH600 and is the answer not in the manual?
General| Weight | 27 kg (60 lbs) |
|---|---|
| Type | Dry pump |
| Flow Rate | 600 L/min |
| Maximum Pressure | 10 bar |
| Power Consumption | 1.1 kW |
| Ultimate pressure | <6.7 x 10-3 mbar (<5 x 10-3 Torr) |
| Max Flow Rate | 600 L/min |
| Motor Power | 1.1 kW |
Details electrical supply requirements, including voltage, frequency, and power consumption for various models.
Steps for connecting the iH system to external vacuum and exhaust systems, with safety warnings.
Instructions for connecting the iH system to the main electrical supply, including safety measures.
How to integrate the iH system with an external emergency stop control circuit.
Steps to follow for initial system startup, checks, and verification after installation.
Recommendations for installing extra safety equipment, such as nitrogen flow measurement.
Step-by-step guide for safely starting the iH pumping system.
Procedures for safely shutting down the iH system manually.
Details on how the iH system automatically shuts down in response to specific alarm conditions.
Information on safety sensors, warnings, and alarms that trigger system shutdowns.
How to use the emergency stop switch to safely halt the iH system operation.
Guidelines for safe maintenance practices and determining the frequency of service.
