Chapter 2: Installation and assembly
36 LaserSense HSSD-2 Aspirating Smoke Detector Installers Handbook
Figure
25
: Cable Connections for Connecting to a PC
(1) 9 pin female “D” connector
(2) 9 pin female “D” connector
When multiple detectors are networked together and a command module is
being used, the PC connects to the command module‘s 9-pin RS-232 port (see
Figure 26 below). The cable connections are the same as the Standard detector
cable connections.
Figure
26
: Connecting a PC to the command module’s RS-232 port
To Next Page
Loading...
