Chapter 6: Maintenance
LaserSense HSSD-2 Aspirating Smoke Detector Installers Handbook 71
4. When the replacement cartridge is in place, the detector will automatically
start a FastLearnTM routine.
5. Place the front cover back onto the detector.
Figure 30 below shows how the dust separator (filter) cartridge is replaced. Make
sure to push the cartridge fully home, or the detector will fail to register its
presence, and will continue to indicate Separator change.
Figure 30: Replacing the dust separator (filter) cartridge
(1) Filter
(2) New filter
(3) Old filter
To Next Page
Loading...
