EemaX 208 VAC - Important Safety Instructions; Electrical Grounding Requirements; Installation Environment Precautions; Hot Water Scald Hazards

SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
A green terminal (or a wire connector marked “G”, “GR, “Ground”, or “GROUNDING”) is provided within
the control box. To reduce the risk of electric shock, connect this terminal or connector to the grounding
terminal of the electric service or supply panel with a continuous copper wire in accordance with your
local electrical code.
Do not install in a bath enclosure or shower stall or connect to a salt-regenerated water
softener or a water supply of salt water.
Use copper conductors only.
2
1) MOUNTING THE HEATER TO THE WALL …………………………………………………………
PAGE 3
2) PLUMBING HOOK
-
UP ……………………………………………………………………………………
PAGE 3
3) ELECTRICAL HOOK
-
UP …………………………………………………………………………………..
PAGE 4
4) COMMISSIONING THE HEATER ……………………………………………………………………..
PAGE 5
5) CONTROL FEATURES …………………………………………………………………………………….
PAGE 6
6) REPAIR
PARTS …………………………………………………………………………………………….
7) OPTIONS …...……………………………………………………………………………………………...
PAGE 9
PAGE
11