The optional GFCI consist of (A) Control Module and
(B) Current Transformer. This control module has a
LCD display indicating real-time measurements. The
GFCI module is pre-set from the factory to trip at
3.0A.
Test and reset functions are carried out automatically
every 24hrs. To manual test the GFCI press the test
button for a min. of 1.5 secs. To reset a tripped GFCI
cycle the power of the unit. If equipped with a
disconnect handle turn the handle to the “OFF”
position then back to “ON”.
To Next Page
Loading...
Need help?
General
