EemaX LavAdvantage - Congratulations

9
3. Keep water flowing through the faucet for the
next step.
4. For 60 seconds after “power ON”, display will
countdown from 60 seconds to 0. When the display
timer reaches 45, the unit starts heating.
5. After the 60 seconds in step 4, the display will
show temperature setpoint.
The heater is considered commissioned at this point.
Faucet can be turned off and used as needed.
Note: the temperature display will turn off after 5
minutes of inactivity. Display turns on when water
flows through heater or if either pushbutton is
pressed.
Congratulations!
Your Eemax tankless electric water heater is fully installed and ready for use!
MAXIMUM TEMPERATURE RISE AT SPECIFIED FLOW RATE, °F
GPM
Model
0.35
0.5
1
1.5
2
2.5
3
SPEX1812T
35
25
12
8
6
5
4
SPEX2412T
47
33
16
11
8
7
5
SPEX3012T
59
41
20
14
10
8
7
SPEX3512T
68
48
24
16
12
10
8
SPEX35T
68
48
24
16
12
10
8
SPEX48T
*
66
33
22
16
13
11
SPEX55T
*
75
38
25
19
15
13
SPEX65T
*
89
44
30
22
18
15
SPEX75T
*
102
51
34
26
20
17
SPEX95T
*
130
65
43
32
26
22
SPEX012240T
*
*
79
52
39
31
26
SPEX3208T
59
41
20
14
10
8
7
SPEX4208T
*
56
28
19
14
11
9
SPEX8208T
*
113
57
38
28
23
19
SPEX3277T
59
41
20
14
10
8
7
SPEX4277T
*
56
28
19
14
11
9
SPEX60T
*
82
41
27
20
16
14
SPEX80T
*
*
55
36
27
22
18
SPEX90T
*
*
61
41
31
25
20
SPEX100T
*
*
68
46
34
27
23