Need help?Do you have a question about the EemaX XTP PRO Series and is the answer not in the manual?
General| Category | Water Heater |
|---|---|
| Model | XTP PRO Series |
| Power Supply | Electric |
| Voltage | 240V |
| Type | Electric Tankless Water Heater |
| Temperature Range | 80°F to 140°F |
| Safety | Overheat protection |
| Warranty | 5 years for leaks, 1 year for parts |
Explains the meanings of Danger, Warning, and Caution safety alerts.
Details the ProSeries XTP tankless water heater features and performance.
Lists tools and materials needed for the installation process.
Lists unit error codes, their meaning, and suggested corrective actions.
Checklists for plumbing and electrical installation verification.
Step-by-step guide for verifying proper operation after installation.
Guidance on checking instrument readings and performing preventive maintenance.
Details for technical support, including a form and testing procedures.
Schematic for a recirculation loop through the heater.
Diagrams for single heater installations with recirculation.
Schematics for storage tank and primary/secondary loops.
Diagram illustrating a series installation setup.
Schematic for series installation with a recirculation loop.
Diagram illustrating a parallel installation setup.
Schematic for parallel installation with a storage tank.
Identifies key components and lists part numbers for replacement.
Provides electrical data for heater elements and a wiring schematic.
To Next Page
