What to do if the pressure is decreasing in the Effecta Boiler system?
If the pressure in your Effecta Boiler system is decreasing, it could be due to a leak, water vaporization from the open expansion vessel, or incorrect pre-pressure in the pressure vessel. Check for leaks and fill the system. You may also need to adjust the pressure.
Why is the Effecta Boiler giving less effect and is hard to use?
If your Effecta Boiler is giving less effect and is hard to use, it could be due to moist wood, too little draft through the chimney, or the boiler needing to be cleaned. Try using wood with less moisture and clean the boiler.
What to do if none or little heat is transferred to the accumulator in Effecta Boiler?
If little to no heat is transferred to the accumulator in your Effecta Boiler, it might be due to air in the system or poor wood quality. Try de-airing the system or switch to better wood, or split it finer.
What to do if the laddomat valve is banging or making strange noises in Effecta Boiler?
If the laddomat valve in your Effecta Boiler is banging or making strange noises, and there's poor flue through the system, it could be due to air in the system or low pressure. Try de-airing the system and increase the pressure.
How to fix smoke coming from closed doors of Effecta Boiler?
If you're experiencing smoke coming from closed doors of your Effecta Boiler, it's likely due to leaky seals. Adjust the doors or replace the seals.
How to stop smoke from the grate at start up of Effecta Boiler?
If you're experiencing smoke from the grate when starting up your Effecta Boiler, the fan may not be running. Press the Start button.
Explains the requirement of a coil and mixing valve for domestic hot water production.
Describes the two air inlets controlled by motors for optimal combustion and emission reduction.
Details system requirements like 1500L accumulation volume and benefits of buffertanks.
Instructions on placing the boiler on a firm foundation and maintaining distances to combustibles.
Requirements for the boiler room construction and ventilation for optimal performance.
Emphasizes the importance of well-isolated accumulators and minimum volume for comfort.
Specifies chimney diameter, draft requirements, and condensation risks.
Describes the Laddomat valve's role in connecting the boiler to the accumulator tank.
Highlights benefits of an automatic shunt valve for temperature control and efficiency.
Provides specifications for the expansion vessel's pressure, temperature, and volume.
Explains the safety valve's function to release excess pressure above 1.5 bars.
Details the shunt valve's purpose in mixing water for desired indoor temperature.
Discusses suitable wood types, quality, and mixing for efficient combustion.
Provides guidelines on wood moisture content and log dimensions for optimal storage.
Briefly mentions following regulations for dismantling the boiler.
Covers calibration, tuning lambda value, and sooting procedures accessible via the menus.
Provides detailed instructions for starting and maintaining a fire in the boiler.
To Next Page
General