This dot marks descriptions of activities that you should carry out.
Requirement that must be fulfilled, for example:
The DC circuit breaker is “OFF”.
This dash marks specification lists.
This arrow marks a cross reference.
If a cross reference to another chapter is necessary in the text, this is short-
ened for clarity.
Example: OM, 2 Safety Instructions
This means: see Operating Manual,
Chapter 2 Safety Instructions.
If the cross reference refers to a page, figure or position number, this infor-
mation is added at the end of the cross reference.
Example: Fig. 4-4, Pos. 1
This means: see (in this manual in Chapter 4) in
Figure 4, the position number 1.
Numbers in brackets refer to the positions in the figures.
Annotations within the text are marked with ** and explained accordingly.
1.5 Information obligation
This operating manual must be read and understood by all persons and quali-
fied personnel working with this device (this equipment).
This applies, in particular, to maintenance, operating and cleaning personnel
including persons responsible for transportation and/or disposal.
EFFEKTA Regeltechnik GmbH is not liable for damage incurred or caused by
staff who have not been trained or who have been insufficiently trained!
To Next Page