UPS MKD700/1000 Manual
Content
1 Presentation 4
2 Warranty conditions 5
2.1 Limitation of liability 6
3 Safety 7
3.1 General safety instruction 7
3.2 Transport and storage 7
3.3 Placement 7
3.4 Connection 8
3.5 Operation 8
3.6 Handling batteries 9
3.7 Maintenance, servicing and faults 10
4 Introduction 11
5 System description 12
6 Description of MKD series 13
6.1 Handling elements on the front side 13
6.1.1 LCD display 14
6.1.2 Buttons 15
6.1.3 LED display 16
6.2 Elements on the back side 17
6.3 Acoustic alert signs of the UPS 19
7 Storage and unpacking 20
7.1 Storage of the UPS 20
7.2 Unpacking the equipment 20
8 Installation and connecting of the UPS 21
8.1 Connecting the UPS 22
8.2 Communicational interface of the UPS 23
8.3 Connection sequence 23
9 Operating and controlling the equipment 24
9.1 Operating of the UPS 24
9.1.1 Operating modes and signals 24
9.1.2 Measured value display 27
9.2 Instruction manual of the UPS 28
9.2.1 Switching-on and starting the UPS 28
9.2.2 Switching-off and power down the UPS 28
9.2.3 Changing the basic setting 29
9.2.4 Starting the testing mode 30
9.2.5 Communication 30
10 Setting-up of the UPS 31
11 Troubleshooting 32
To Next Page
Loading...
