Why does warning light 3 flash quickly during the first boom rise on my Effer DMU 3000 PLUS Industrial Equipment?
If warning light 3 flashes quickly during the first boom rise maneuver, and warning lights 1, 2, 4, and 7 are lit with a continuous alarm, the DMU is receiving an anomalous pressure value from the first boom cylinder. Replace the pressure transducer.
What does it mean if warning light 2 flashes quickly and lights 1, 3, 4, and 7 are on with a continuous alarm on my Effer DMU 3000 PLUS Industrial Equipment?
If warning light 2 flashes quickly while lights 1, 3, 4, and 7 are permanently on with a continuous alarm, the DMU is receiving an anomalous pressure value from the second boom cylinder. Replace the pressure transducer.
Why is warning light 1 flashing quickly while lights 2, 3, 4, and 7 are on with a continuous alarm on my Effer Industrial Equipment?
If warning light 1 flashes quickly and warning lights 2, 3, 4, and 7 are on permanently accompanied by a continuous alarm, the DMU is receiving an anomalous pressure value from the jib cylinder. Replace the pressure transducer.
What does it mean if warning lights 1, 2, 3, 4, and 7 are flashing quickly with a continuous alarm on my Effer DMU 3000 PLUS Industrial Equipment?
If warning lights 1, 2, 3, 4, and 7 are flashing quickly and a continuous acoustic alarm is sounding, it means a crane control bank lever is not in its central position because a microswitch is operated in both directions. Replace the faulty microswitch fitted to the control bank.
What does it mean if warning light 3 flashes quickly and lights 1, 2, 4, and 7 are on with a continuous alarm on my Effer Industrial Equipment?
If warning light 3 flashes quickly while lights 1, 2, 4, and 7 are permanently on with a continuous alarm, the DMU isn't receiving a pressure value from the first boom cylinder. Replace the pressure transducer or restore the electric connection between the DMU and the pressure transducer.
What to do if warning lights 1, 2, 3, 4, and 7 are flashing slowly with a continuous alarm on my Effer Industrial Equipment?
If warning lights 1, 2, 3, 4, and 7 are flashing slowly accompanied by a continuous acoustic alarm, the DMU is indicating that a crane control bank lever is not in the central position. This is due to a microswitch behind a control bank lever being operated. Replace the faulty microswitch fitted to the control bank.
Why does the jib load limiting device activate on my Effer DMU 3000 PLUS with a lower load than allowed?
If the jib load limiting device activates with a load lower than allowed, the DMU is receiving an anomalous pressure value from the jib cylinder, higher than expected for the applied load. Replace the electronic card to resolve this issue.
Detailed description of various parameters that can be adjusted within the DMU.
Instructions for viewing and modifying data parameters within the DMU.
Guide to diagnosing sensor and DMU hardware status and potential faults.
Procedure for diagnosing the functionality of control bank levers.
Interpreting lockout and alarm indicators for system faults.
Troubleshooting guide for identifying and resolving DMU system faults.
Troubleshooting guide for common operational errors blocking crane movement.
General| Brand | Effer |
|---|---|
| Model | DMU 3000 PLUS |
| Category | Industrial Equipment |
| Language | English |
To Next Page
