SETUP OPTION REFERENCE 35
Default paper sizes US, Metric (default is US in
the United States, Metric
elsewhere)
Prints on US paper sizes (for example, Letter, Legal, 11x17), or Metric
paper sizes (for example, A4 or A3) by default. When no page size is
defined within a PostScript file, jobs are printed on Letter paper if you
selected US; or A4 paper if you selected Metric.
Offset mode On, Off Specify whether to have jobs offset after they are printed. You must
have a finisher installed.
Print master Yes, No
Select Yes to print a FreeForm master when created and printed to the
Fiery Controller. The master is retained on the Fiery Controller after
printing unless deleted later. Select No only to process and hold a
FreeForm master on the Fiery Controller.
Print quality Standard
, Enhanced,
High Resolution/Photo
Specify the print quality for your job.
Print to PS error Yes, No
Specify whether the Fiery Controller should print the available portion
of a print job when it encounters a PostScript error. Select Yes to print
the portion of the job that was processed before the error occurred;
select No to cancel the print job entirely when a PostScript error is
encountered. Leave this option at No unless you encounter
printing problems.
Option Settings
(default is underlined)
Description
To Next Page
Loading...
Need help?
General
