SETUP OPTION REFERENCE 34
SETUP OPTION REFERENCE
This chapter describes the default settings that you can set for the following types of options:
• PS (PostScript)
•Job Log
• RIP While Receive
For more information about print options, see Printing.
For setup options not listed this section, refer to Configure Help.
To determine the current Setup defaults, print the Server Configuration page from Command
WorkStation.
PS Setup options
• To access PS Setup options, choose Configure > PDL > PS.
Option Settings
(default is underlined)
Description
Allow courier substitution Yes
, No Specify whether to substitute Courier for fonts that are unavailable
when you download files to the Fiery Controller, or when you print a
document for which you do not have the corresponding printer font.
If this option is set to No, jobs with fonts that are unavailable on the
Fiery Controller hard disk generate a PostScript error and do not print.
This setting does not apply to PDF files; font substitution occurs
automatically in PDF files.
Convert paper sizes No
, Letter/Tabloid->A4/A3,
A4/A3->Letter/Tabloid
Converts paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a
letter size document is automatically printed on A4 paper.
This option works in conjunction with the Default Paper Sizes option.
For example, if Convert Paper Sizes is set to Letter/Tabloid->A4/A3,
and Default Paper Sizes is set to US, jobs are printed A4/A3 size. This
also includes Fiery Controller system pages such as the Start Page,
Test Page, and Job Log.
Cover page Before Job, Disable
Prints a cover page (job summary) containing the name of the user who
sent the job, the document name, the server name, the time the job was
printed, the number of pages printed, and the status of the job.
If a PostScript error occurs and the Cover Page option is set to Before
Job, the cover page lists the PostScript error message instead of the job
status.
To Next Page
Loading...
Need help?
General
