EFI Fiery - Cannot Connect to the Fiery Controller with Command Workstation

TROUBLESHOOTING 51
Cannot connect to the Fiery Controller with Command WorkStation
If there is a problem connecting to the Fiery Controller, an error message is displayed.
The problem can occur when:
• The Fiery Controller is initially turned on.
• The Fiery Controller restarts.
• You change settings affecting the server address and do not reconfigure the connection to
the server.
If you experience this problem, try the following solutions, in this order:
• Restart Command WorkStation and try to connect.
• Restart the Fiery Controller.