ADMINISTERING THE FIERY CONTROLLER 45
To manage address books, send an e-mail to the Fiery Controller with commands in the
Subject and Message fields. The Fiery Controller responds by e-mail with information about
each request, as described in the following table.
To add or remove more than one address at a time, list the addresses on separate lines in the
message field of the e-mail.
Task Administrator
subject field
Administrator
message field
E-mail response
subject field
E-mail response
message field
To r et ri ev e
a specific
address book
#GetAddressBook
name of address book
For example:
#GetAddressBook Admin
Address Book name of
address book
For example:
Address Book Admin
List of addresses in the
specified address book
To add an address
to an address book
#AddAddressTo
name of address book
For example:
#AddAddressTo Print
name@domain
or
“display name” <name@domain>
Added to Address Book
name of address book
For example:
Added to Address Book
Print
List of addresses added
to the address book
The Fiery Controller
also lists any addresses
that cannot be added
and includes the reason.
To clear an address
book
#ClearAddressBook name of
address book
For example:
#ClearAddressBook User
Address Book name of
address book cleared
or
Address Book name of
address book not cleared
For example:
Address Book User
cleared
If the address book is
not cleared, the reason
is given.
To delete an
address from an
address book
#DeleteAddressFrom
name of address book
For example:
#DeleteAddressFrom User
name@domain
or
“display name” <name@domain>
Removed from Address
Book name of address
book
For example:
Removed from
Address Book User
Deleted Address 1
Deleted Address 2
The Fiery Controller
also lists any addresses
that cannot be deleted
and includes the reason.
To receive help for
Fiery Controller
e-mail services
#Help RE: Help Provides
troubleshooting
e-mail syntax
To Next Page
Loading...
Need help?
General
