QS Series Basic Operator's Guide
Safety
Before working with any VUTEk printer, be sure that you
have read, and understand, the safety precautions and
procedures in your Printer Safety Guide (D1111-A).
Because there are significant safety issues
involved, and printing skills required, EFI requires
customers to have at least one trained and
certified employee in attendance at all times
during printing.
Without the immediate intervention of a trained
operator, small problems and failures during
printing can cause significant damage to your
printer.
EFI cannot be held responsible for injuries, printer damage,
lost productivity, or other damage caused by personnel using
or approaching the QS Series printer without adequate
training and without first reading and understanding your
Printer Safety Guide, VIP Guide, and this User’s Guide.
Ultraviolet light (UV) safety
Ultraviolet light and UV-curable ink can be hazardous to
your eyes and skin. Always observe all applicable safety
precautions when working on and near the QS Series printer.
UV shields protect operators from exposure to harmful
ultraviolet light and ink overspray. If a UV shield is opened
during the printing operation, the printer will close the lamp
shutters and stop the carriage, preventing the operator from
being exposed to the harmful UV lamps.
Each person working on or near the QS Series printer should
complete and sign a copy of the UV Safety Acknowledgement
Form available on the EFI-VUTEk website.
OMM-00038-US English-F 3
To Next Page
Loading...
Need help?
General
