Equipment Setup and Operation
EFIX C5 GNSS USER GUIDE | 2022-03 P a g e | 30
(5) When this icon appears, the text will show “Tilt is not available, please
measure in alignment” at the bottom of interface.
(6) Tap to close tilt compensation.
3.4.2 Notes of using tilt measurement
1. At the beginning of initialization, the pole height of the instrument should be the same as
that antenna height in the software.
2. In the process of tilt measurement, if the controller shows that “Tilt is not available, please
To Next Page
Loading...