Configuring Through a Web Browser
EFIX C5 GNSS USER GUIDE | 2022-03 P a g e | 40
5.3.3 Reference Station Settings Submenu
Use this screen to configure settings such as the station coordinates and the broadcast station
identifiers. You must enter accurate information in these fields, as this data affects the
accuracy of logged data files and broadcast correction data significantly:
For Reference Station Mode:
There are three modes available:
a) Auto Rover: The receiver will serve as a rover after this mode is enabled, and then
receive correction data through the working mode set last time.
5.3.4 Receiver Reset Submenu
Use this screen to completely or partially reset the receiver:
To Next Page
Loading...