4. Installation
18
4.2
Space Requirements
Installation should be carried out by trained personnel
only. Wear proper work clothes. Avoid flowing
garments and wear a hair net if you have long hair.
Clothing and hair can get caught in moving or rotating
parts such as in a drill.
Be sure to leave enough space behind the installation
area when drilling or cutting out openings. Also be sure
to follow the tool manufacturer’s safety instructions.
Solvents used in sealants may emit fumes. Make sure
that there is sufficient ventilation and follow the
instructions for the sealing compound.
Make sure when choosing a location, that the
temperature ranges between –20° C and +40° C.
This unit generates heat, thus requiring ventilation.
Please take this into account when considering
possible locations.
min.
10 cm
Zuluft
Provide for a vent opening measuring at least 10 cm
across when installing. Use the off-heat duct (included)
to remove warm air.
Install only in upright position. Use the mounting plate
(included).
cooling
air
To Next Page
Loading...
