4. Installation
20
4.3
Locations
1
2
3
Ideas for installation:
1 false floor or side compartment
2 seat bench
3 rear storage area
4.4
Securing the unit
Select a suitable location as described in Chapter 4.2,
paying attention to the dimensions in Chapter 3.4.
1. Run the belt in the groove under the mounting plate.
2. Secure the mounting plate tightly to the desired
location. Use eight proper screws and dowels, if
necessary, so that the mounting plate cannot shake
loose in case of an accident.
3. Place the unit onto the mounting plate.
To Next Page
Loading...
