Charging current
Please note that the device interrupts power
generation briefly several times an hour during
normal operation and a charging power of 0.0 A is
displayed then.
Automatic
V03 9.06I12V/24V QB
Firmware version
Please check on a regular basis (at least once a
year), if software updates are available.
Automatic
100200-0808-0002
Serial number
Automatic
Operating hours 500 h
Total operating hours
Automatic
Standby
Standard display
The standard display will be restored after about 30
seconds. Alternatively, you can return to the
standard display by pressing
>>
again.
Automatic
Charging mode
If you have connected the optional cartridge sensor
to your unit, a fuel cartridge will appear in the
display as soon as a predetermined amount is
reached.
Always keep a reserve fuel cartridge at the ready.
The cartridge need only be changed when the
message “Please change cartridge“ appears in the
display.
To Next Page
Loading...
