EasyManua.ls Logo

EFT G06 - Appendix; Specifications

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EFT agriculture drone frame installation instruction
© 2019 EFT All right reserved
9
11
Appendix
Specifications
---------------------------------------------------------------------
Buck regulator
---------------------------------------------------------------------
Use method of drug breakage detection function: The drug breakage detection
factory is currently limited to the use of 25W water pump. Connect the 3pin line of the drug
breakage signal to the detection interface of the flight control liquid level meter. The drug
breakage signal is output with high and low level signals, and water is high No water is low
level, the air in the water pump needs to be exhausted before take-off to avoid
misjudgment after take-off.
Frame Specifications
Recommended configuration
Wheelbase:1172mm
Motor: HobbyWing X6/6215
Expand Size:1580*1270*475mm
Paddle: 23-24 inch folding paddle
Folded size:605*640*475mm
ESC: 60-80A FOC
Tank capacity:6L
Power supply voltage: 12S
Frame weight: 4.8kg (excluding spray system)
Maximum takeoff weight: 17.4kg
Product specification
Size: 47*34*24mm (excluding fixed ears)
Weight: 72g
Installation hole distance: 54-60mm
Power supply voltage: 15-60V
Output voltage: 12V
Maximum current: 6A
Maximum power: 72W
Stroke range: 1120-1920μs
Drug off signal: with water-high level without
water-low level

Related product manuals