CLEAN THE MACHINE
◾ After each use of 3-teeth blade / trimmer head, clean
the debris, clogged soils or grass on the blade and
guard with a soft brush.
NOTICE: When the line-cutting blade becomes dull,
please sharpen it performed by a qualied service
technician or replace with a new line-cutting blade as
necessary.
◾ After each use of brush cutter, clean the cutting unit
using a damp cloth with a mild detergent.
◾ Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock
hazard. Wipe off any moisture with a soft dry cloth.
◾ Use a small brush or a small vacuum cleaner to clean
the air vents on the rear housing.
STORING THE MACHINE
◾ Remove the battery pack from the tool.
◾ Wear heavy gloves to clean the tool thoroughly.
◾ Mount the blade sheath onto the 3-teeth blade for safe
saving (Fig. Y).
◾ Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the machine on or adjacent to fertilizers, gasoline, or
other chemicals.
Protecting the environment
Do not dispose of electrical equipment,
battery charger and batteries/
rechargeable batteries into household
waste!
According to the European law 2012/19/
EU, electrical and electronic equipment
that is no longer usable, and according to
the European law 2006/66/EC, defective
or used battery packs/batteries, must be
collected separately.
If electrical appliances are disposed of in
landlls or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.
EC DECLARATION OF CONFORMITY
We, EGO EUROPE GMBH.
Wahlwiesenstrasse 1, D-71711 Steinheim an der Murr
Deutschland
Declare that the product 56 VOLT LITHIUM-ION REAR
MOTOR BIKE-HANDLE BRUCHCUTTER BC3800E complies
with the essential health and safety requirements of the
following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU, 2000/14/EC
Standards and technical specications referred to:
EN ISO 11806-1, EN 60745-1, EN 55014-1, EN 55014-2,
IEC 62321.
Trimmer head
3-teeth metal
blade
Measured Sound
Power Level:
94.80 dB(A) 94.04 dB(A)
Guaranteed Sound
Power Level:
96 dB(A) 96 dB(A)
Conformity assessment procedure of Annex VI is followed
according 2000/14/EC.
Notied Body: DEKRA Certication B.V. Meander 1051
/ P.O. box 5185 6525 MJ ARNHEM / 6802 ED ARNHEM,
Netherlands
Notied Body number: 0344
Peter Melrose Dong Jianxun
Managing Director of EGO
Quality Manager of Chervon
Europe GmbH
* (Authorized representative for CHERVON and responsible for technical documentation)
01/02/2017
To Next Page
Loading...
Need help?
General
