56V LITHIUM-ION CORDLESS CHAIN SAW32
Proper Grip On Handles
Wear non-slip gloves for maximum
grip and protection.
With the saw on a rm, at surface,
hold the saw rmly with both hands.
Always grasp the front handle with
the left hand and the rear handle
with the right.
The ngers should encircle the
handle, with the thumb wrapped
under the front handle (Fig. 18).
WARNING:
Never use a left-
handed (cross-handed) grip, or any
stance which would place your body or
arm across the chain line.
WARNING:
Do not operate the
trigger switch with your left hand and hold
the front handle with your right hand. Never
allow any part of your body to be in the chain
line while operating a saw (Fig. 19).
Proper Cutting Stance (Fig. 20)
Both feet should be on solid ground,
with weight evenly spread between
them.
The left arm should be straight,
with the elbow locked. This helps to
withstand the forces generated by kickback.
Your body should always be to the left of the chain line.
CUTTING
Basic Cutting
WARNING:
Always be sure of your footing and hold the chain saw rmly with
both hands while the motor is running.
20
Chain line
Straight Arm
Position
18
Grip with thumb
below handle
19
Chain line
To Next Page
Loading...
