56V LITHIUM-ION CORDLESS CHAIN SAW38
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields during
power tool operation or when blowing dust. If the operation is dusty, also wear a dust mask.
WARNING:
To avoid serious personal injury, remove the battery pack from the
chain saw before inspecting, cleaning, or performing maintenance. A battery operated tool
with the battery pack inserted is always on and can start accidently.
WARNING:
When cleaning the chain saw, DO NOT immerse in water or other liquids.
WARNING:
Do not at any time let brake uids, petrol, petroleum-based products,
penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken,
or destroy plastic, which may result in serious personal injury.
CLEANING
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
Remove the side cover, and then use a soft brush to remove debris from the guide
bar, saw chain, sprocket and side cover.
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
To Next Page
Loading...
Need help?
General
