EGO HT2400E - PACKING LIST; DESCRIPTION; Component Identification; Hand Guard Function

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E 56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E28 29
EN EN
Excessive vibration or
noise.

Dry or corroded blades.

Lubricate the blades,
following the section
“LUBRICATING THE BLADE”
found on page 24 in this
manual
.

Blades or blade support is
bent.

Replace with a new blade or
support. Contact EGO service
center for blade or support
replacement service, found on
page 29.

Bent or damaged teeth.

Replace with a new blade.
Contact EGO service center for
blade replacement
service, found on page 29
.

Loose blade bolts.

Tighten the blade bolts.
Using a wrench, turn the bolt
clockwise to tighten.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO
Warranty policy.