56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 19
WARNING:
If any parts are missing, damaged or broken, do not operate your
trimmer until they have been replaced. Failure to do so could result in possibly serious
personal injury.
WARNING:
To prevent serious personal injury, always use both the front handle
and the rear handle to hold the hedge trimmer during operation.
WARNING:
To prevent serious personal injury, keep hands away from blades.
Do not attempt to remove cut material or hold material to be cut when the blades
are moving. Make sure that the blades have totally stopped and the battery pack is
removed before clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit.
WARNING:
Clear the area to be cut before each use. Remove all objects, such
as cords, lights, wire, or string that could become entangled in the cutting blade and
create a risk of serious personal injury.
Before starting the hedge trimmer, maintain proper footing and balance and do
not overreach. Wear safety goggles, non-skid footwear and rubber gloves. Hold
the unit with both hands with the cutting blades directed away from you. Always
use the hedge trimmer properly.
Do not trim too much at one time. This can cause the blades to bind and slow,
reducing the cutting efficiency.
Do not force the hedge trimmer through heavy shrubbery. This can cause the
blades to bind and slow down. If the blades slow down, reduce the pace of
your work.
When trimming new growth, use a wide sweeping action, so that the stems are
fed directly into the cutting blade. Older growth will have thicker stems and will
be trimmed most easily by using a sawing movement.
Always cut stems or twigs that are less than 1 in. thick. Use a non-powered hand
saw or pruning saw to trim large stems.
To Next Page
Loading...
Need help?
General
