56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500/HTX7500 5
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
WARNING: Residual risk! People with electronic
devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of
electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the
pacemaker.
WARNING: To ensure safety and reliability, all repairs
and replacements should be performed by a qualied
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including all
safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Indicates a potential personal
injury hazard.
Read
Operator’s
Manual
To reduce the risk of injury,
user must read the operator’s
manual.
Do Not Expose
To Rain
Do not use in the rain or leave
outdoors while it is raining.
Keep hands
and feet away
from the
cutting tool
Never attempt to operate your
power tool with one hand.
Loss of control of the power
tool resulting in serious or fatal
injury may result. To reduce the
risk of cut injuries, keep hands
and feet away from the cutting
tool. Never attach a moving
cutting tool with your hand or
any other part of your body.
Wear Eye
Protection
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product
Noise
Guaranteed sound power
level. Noise emission to the
environment according to
the European community’s
Directive.
CE
This product is in accordance
with applicable EC directives.
WEEE
Waste electrical products
should not be disposed of with
household waste. Take to an
authorized recycler.
XXcm
Blade Length The length of the blade
Ø33 mm
Cutting
Capacity
Max. Cutting capacity of the
blade
V Volt Voltage
Direct Current
Type or a characteristic of
current
Original instructions
To Next Page
Loading...
