2. Test
①
Test the main switch:
• Insert a fully charged battery pack into the battery case.
• Adjust the handle to the operating position and fully extend the side rails and lock with the side
clamps.
• Press the trigger to check if the mower can be turned on properly.
②
Test the self-propelled switch:
• Insert a fully charged battery pack into the battery case.
• Adjust the handle to the operating position and fully extend the side rails and lock with the side
clamps.
• Press the self-propelled switch trigger to check if the mower moves.
③
Test the self-propelled speed-adjusting PCB:
Follow the instructions in step 2. Meanwhile turn the PCB knob
to check if the mower’s speed can be adjusted .
20
6. The Main Switch/Self-propelled Switch/Speed- adjusting PCB
To Next Page
Loading...
