EasyManuals Logo

EGO Power+ User Manual

EGO Power+
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
56V LITHIUM-ION CORDLESS LINE TRIMMER 25
9. Hold the spool and spool retainer; grasp the line and pull it to release the line
from the notch in the eyelet (Fig. 21).
10. Check to see if the spring is
properly located in the spool base.
If it comes loose or drops out,
position the spring in the mounting
hole of the spool base and press it
in place (Fig. 22).
11. With the spool base facing
downward, align the tabs on the
spool retainer with the slots in the
spool base and press the retainer
evenly down until it snaps into
place (Fig. 23).
NOTICE: Make sure the spool retainer
tabs snap into place or the spool will
come out during operation.
23
Slot
Tab
23
Slot
Tab
Spring
Mounting Hole
22
Spring
Mounting Hole
22
2121

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO Power+ and is the answer not in the manual?

EGO Power+ Specifications

General IconGeneral
ModelLM2102SP
Cutting Width21 inches
Motor TypeBrushless
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Foldable HandleYes
Battery56V ARC Lithium™
Run TimeUp to 60 minutes (with 7.5Ah battery)
Drive TypeSelf-propelled
Warranty5-year tool warranty, 3-year battery warranty

Related product manuals