25
9. Getting the RadioLINK Base Serviced
If, within the guarantee period, your RadioLINK Base fails to work after you have carefully
read all the instructions and checked that the unit has been installed correctly contact
Customer Assistance at the nearest address given at the end of this manual.
If it needs to be returned for repair or replacement,
lightly press the “off” switch to disconnect the
rechargeable cells and put both the Alarm and the
Ei168RC RadioLINK Base in a padded box and send
it to “Customer Assistance and Information” at the
nearest address given on the unit or in this leaflet.
State the nature of the fault, where the RadioLINK Base and Alarm were purchased and
the date of purchase. Do not snap the Smoke/Heat Alarm on to the RadioLINK Base as this
connects the battery and the unit may beep or Alarm in the post.
RECHARGEABLE
CELL "ON" SWITCH
To Next Page
Loading...
Need help?
General
