3
Model
Can be
wire-linked
Wireless
compatibility
Optional radio
module
Ei650
No No No
Ei650W
No Yes Ei650M/Ei600MRF
Ei650C
Yes Yes Ei650M/Ei600MRF
Ei650RF
No Yes Included
Ei650i
No No No
Ei650iW
No Yes Ei650M/Ei600MRF
Ei650iC
Yes Yes Ei650M/Ei600MRF
Ei650iRF
No Yes Included
For an early warning in the event of a fire, install this smoke alarm on every floor in your building and in
escape routes, hallways and enclosed rooms to make sure you are protected against fire. Heat detectors
can be installed in kitchens and other areas where smoke alarms are not suitable (if these rooms are not
going to be used as escape routes).
The i series has been specially developed as a high-end, sophisticated product range. An integrated
microprocessor and the extra yellow diagnosis LED allow potential faults to be minimised during regular
maintenance, which means unscheduled servicing can be avoided.
The Ei650C and Ei650iC models can be wire-linked or interlinked wirelessly to form a network, ensuring
the alarm can be heard throughout the building in an emergency. Wireless interlinking requires special
radio models (Ei650M/Ei600MRF). The modules must be purchased separately. The Ei650W and Ei650iW
models can only be interlinked using radio modules.
The Ei650 and Ei650i models are stand-alone smoke alarms that cannot be interlinked using wires or
wirelessly (see table).
To Next Page
Loading...
Need help?
General
