Signal overview for Ei650i Action Red LED
Yellow LED Acoustic signal Replace alarm
Normal mode
Starting up Twist onto alarm base 1 x flashing
Function test Press and hold down button Fast flashing (0.5 sec.)
Off
Gets louder until full volume is
reached
If it does not work
Alarm detects smoke Fast flashing (0.5 sec.)
Silencer Press and release button 1 x flashing every 8 sec.
Off Off (for 10 min.) If it does not work
Alarm via interlinked alarm Off
1 x flashing every 32 sec. 1 x beeping simultaneously Yes
Silence the signal Press and release button Off
Off for 12 hours Off for 12 hours Yes
Dirty smoke chamber
Fast flashing (0.5 sec.)
Off Full volume See below*
Silence the signal Press and release button 1 x flashing every 8 sec.
Silence (2nd time)
Press and release button
within 4 min.
1 x flashing every 8 sec.
Off Off (for another 10 min.) Yes
Silence (3rd time)
Press and release button
within 4 min.
2 x flashing every 8 sec.
Off
2 x fast beeping every 10 min.
for 8 hrs.
Yes
Defective smoke chamber
Off
2 x flashing every 32 sec. 2 x beeping simultaneously Yes
Silence the signal Press and release button 1 x flashing every 8 sec.
To Next Page
Loading...
Need help?
General
