GB
15
NOTE: Low-kickback saw chain is chain that has met the
kickback performance.
A safety sign is fitted to the chain saw’s fan filter cover.
This label, along with the safety instructions on these
pages, should be carefully read before attempting to
operate this unit.
• HOW TO READ SYMBOLS AND COLORS (FIG. 1)
GREEN RECOMMENDED
Recommended cutting proce-
dure.
WARNING
1. Beware of kick back.
2. Do not attempt to hold saw
with one hand.
3. Avoid bar nose contact.
RECOMMENDED
4. Hold Saw properly with both
hands.
• DANGER! BEWARE OF KICKBACK!
KICKBACK may occur when the NOSE or TIP of the
guide bar touches an object, or when wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back
toward the operator.
PINCHING the saw chain along the BOTTOM of the
guide bar may PULL the saw forward away from the
operator. PINCHING the saw chain along the TOP of the
guide bar may PUSH the guide bar rapidly back toward
the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
TECHNICAL DATA
Engine displacement 38 cm
3
Maximum drive power 1.4 kW
Cutter rail length 16” (40cm)
Cutting length 37 cm
Chain gap 10 mm
Chain thickness 1.27 mm
Idle speed 3,100 min
-1
±10%
Recommended maximum speed with cutting
attachment 11500 min
-1
Tank capacity 296 ml
Oil tank capacity 180 ml
Anti-vibration function Yes
Teeth 6
Chain brake Yes
Clutch Yes
Automatic chain lubrication Yes
Low-kickback chain Yes
Net weight without chain and chain bar 5.1 kg
Net weight 5,88 kg
Petrol consumption approx. 1250
g/kWh
Sound pressure level 101 dB(A)
Working pressure level 113 dB(A)
Braking time from working speed 0.07 s
Vibration 9,68 m/s
2
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
앬 Type of machine
앬 Article number of the machine
앬 Identification number of the machine
앬 Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
IMPORTANT SAFETY
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
1
3
2
4
Fig. 1
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert.
Rotational kickback and pinch-kickback are
major chain saw operational dangers and the
leading cause of most accidents.
Fig. 2A
Fig. 2B
A
A
B
A
A
B
C
BEWARE OF:
ROTATIONAL KICKBACK THE PUSH
(Fig. 2A) (PINCH KICKBACK)
AND PULL REACTIONS
(Fig. 2B)
A = Kickback path A = Pull
B = Kickback reaction zone B = Solid objects
C = Push
To Next Page
Loading...
