To Next PageTo Next PageWhat to do if my EINHELL Air Compressor does not start?
If your EINHELL Air Compressor isn't starting, try the following: Ensure the battery is charged, press the button Fig. 7 / Item 9b, set a higher pressure, and press the On/Off /Automatic switch.
Why EINHELL Air Compressor pressure is set but the compressor does not switch off?
If the EINHELL Air Compressor doesn't switch off at the set pressure, it might be because the “Manual” switch (Fig. 6 / Item 7b) is pressed. To switch off, release the switch. For automatic mode operation, refer to section 6.4, point a.
How to switch off EINHELL CE-CC 18 Li?
To switch off the EINHELL Air Compressor, release the switch.
Why my EINHELL CE-CC 18 Li does not start up?
If your EINHELL Air Compressor isn't starting, here's what to check: * The battery might be empty, so ensure you charge it. * Verify the device is switched on by pressing the button (Fig. 7 / Item 9b). * The set pressure could be too low; try setting a higher pressure. * Make sure the On/Off / Automatic switch (Fig. 1 / Item 7) is pressed.
How to fix EINHELL Air Compressor that does not switch off at the set value?
If the pressure is set on your EINHELL Air Compressor, but it doesn't switch off at the set value, make sure the “Manual” switch (Fig. 6 / Item 7b) is not pressed; release the switch to turn it off. For automatic mode, see section 6.4. point a.
General| Brand | EINHELL |
|---|---|
| Model | CE-CC 18 Li |
| Category | Air Compressor |
| Language | English |
Explains symbols used in the manual for safe operation and hazard identification.
Crucial safety precautions to prevent injury and damage during equipment use.
Identifies and labels all parts of the cordless car compressor for user reference.
Lists all components included in the product packaging for verification.
Defines the correct uses for the compressor and clarifies what it is not suitable for.
Provides essential technical details like voltage, pressure, and output for the compressor.
Details noise emission and vibration values, crucial for user safety and comfort.
Specifies the vibration emission value for the handle, relevant for prolonged use.
Offers advice on how to reduce exposure to noise and vibrations during operation.
Highlights potential health risks and hazards that may remain even with correct usage.
Covers essential checks before operating the compressor and environmental requirements.
Step-by-step guide on how to charge the lithium-ion battery for the compressor.
Explains how to check the battery charge level using the indicator LEDs.
Instructions on how to correctly fit the battery pack into the compressor.
Details the procedure for switching the compressor on and off, including auto-off function.
Explains the information shown on the compressor's digital display during operation.
Guides users on selecting units and adjusting pressure settings in automatic and manual modes.
Instructions on connecting the hose, using adapters, and operating the compressor for inflation.
Provides instructions on how to clean the equipment safely and effectively.
States that no internal maintenance is required for the equipment.
Lists the information needed when ordering spare parts or accessories.
Advises on the correct and environmentally friendly disposal of the equipment and packaging.
Recommends ideal temperature and conditions for storing the compressor and accessories.
Explains the meaning of different LED indicators on the battery charger.
Provides a table of common faults, their possible causes, and recommended remedies.
Directs users to service partners for repairs, spare parts, and consumables.
Outlines the process and information required for reporting equipment defects or faults.
Details the conditions, limitations, and duration of the product's warranty.
Explains how to submit a warranty claim and what documentation is needed.
