EINHELL GC-WW 1046 N User Manual

GB
- 21 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_GC_WW_1046_N_GC_WW_1250_NN_SPK9.indb 21 31.01.2019 07:16:22

EINHELL GC-WW 1046 N Specifications

General

Flow rate	4600 l/h
Maximum suction height	8 m
Maximum delivery height	48 m
Maximum operating pressure	4.8 bar
Maximum input water temperature	35 °C
Proper use	Garden
Product color	Black, Red, Stainless steel
Housing material	Steel
Drive shaft material	Stainless steel
AC input voltage	220-240 V
Power cable type	H07RN-F
Power source type	AC
AC input frequency	50 Hz
International Protection (IP) code	IPX4
Cable length	1.5 m
Suction port	1 1/4\
Discharge port	1\
Package depth	585 mm
Package width	300 mm
Package height	542 mm
Package weight	17500 g

Weight and Dimensions

Weight	14395 g