EINHELL RT-RH 32 Original Operating Instructions

GB
- 18 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_RT_RH_32_SPK9.indb 18Anl_RT_RH_32_SPK9.indb 18 14.03.2019 11:26:4614.03.2019 11:26:46

EINHELL RT-RH 32 Specifications

General

Cord length	4.45 m
Input power	1250 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Impact rate	4300 bpm
Rated speed (max)	800 RPM
Impact energy (max)	3.5 J
Drilling diameter in steel (max)	- mm
Drilling diameter in concrete (max)	12 mm
Soft grip	Yes
Chuck type	SDS Plus
Product color	Red
Power protection features	Overload

Weight and Dimensions

Width	135 mm
Height	340 mm
Weight	6050 g
Package weight	9450 g